Vacuum brazing scheme of stone carving cutter

---

Stone carving knife is a special tool used in CNC stone carving machine. The special nature of stone determines that the stone carving knife must have the characteristics of high structural strength and high wear resistance.

About the diameter of the tool handle: the selection principle of the diameter of the tool handle is mainly to select the reasonable strength of the tool body to prevent the tool from breaking. The hardness, depth and speed of each carving stone are different, and the structural rigidity and perpendicularity of the main shaft are different, which will lead to different requirements for the strength of the handle.

1. Generally speaking, the diameter of the mainstream handle for relief is more than 8mm. Engraving machine performance is excellent, run high-speed customers, can try to choose a large diameter handle, to meet the high-speed requirements.

The choice of stone carving knife must be based on different carving materials and different carving methods.

2. Because of the stone carving, the cutting tool must bear a large load. Therefore, the stone carving knife uses more than 6mm diameter handle.
Meet the requirements of customers in carving different stone materials.

Classification of carving tools
1. Electroplating knife

Suitable for granite and other materials

2. Cladding knife

Granite, marble can be used.

3. Diamond brazing carving knife

Brazing knife is suitable for marble, sandstone, bluestone and other soft materials.

4. Sintering knife

Suitable for granite and other materials

Brazing method: vacuum brazing