Vacuum Heat Treatment Furnace
Vacuum Sintering Furnace
Vacuum Brazing Furnace
(The article comes from the Internet. If reprinting is not allowed, please contact our company to delete it.)
Please send us your inquiry about the customization of other furnace types or related questions about vacuum furnace. We will reply you immediately. Thank you.
Downloads
All documents in the overview
News & Press
All news at a glance
Request
Send us a message
Email: contact@vacfurnace.com
Tel : +86-21-50878190
Wechat : 2210154395
Address: NO.1299, XinJinQiao Road, Pudong New Area, Shanghai, China.
Copyright © 2010-2021 Shanghai Gehang Vacuum Technology Co.,Ltd. All Rights Reserved.
Nickel Chrome Heating Element Furnace
1. Nickel-chromium Alloy Characteristics
Nickel-chromium alloys have higher high-temperature resistance strength than iron-chromium-aluminum alloys, and are not easily deformed when used at high temperatures. They have good plasticity and non-magnetic properties after long-term use. They have high resistivity, heat fatigue resistance, high electrical resistivity, and good workability. It has sufficient mechanical strength and good oxidation resistance at high temperature. Nickel-chromium alloys are widely used in the manufacture of various industrial electric furnaces, civil electric furnace wires, radiant tubes and other heating elements, and are often used to manufacture heating elements in various resistance heating equipment.
2. Resistance Heating Vacuum Hot Pressing Sintering Furnace
Characteristic
The vacuum sintering furnace is an internal heating resistance heating vacuum furnace, which consists of a furnace body, a heating chamber, a vacuum unit, a cooling water system,
It is composed of charging and discharging system and electric control system.
1.1 Vacuum sintering furnace body:
a) Double-layer water-cooled structure, made of 304 stainless steel, internally polished according to high vacuum requirements, and externally polished and then sandblasted.
b) Vertical structure, the furnace body is cylindrical, the lower part is the head, and the upper part is a vacuum flange. The furnace door is located above the furnace body and is connected with the furnace body by flange. The sealing structure is in the form of a flange. The high temperature resistant fluorine rubber lip ring is sealed, and the handwheel bolts are locked.
c) The vacuum port is located on the upper part of the furnace body, connected with the vacuum flange of the vacuum unit, and is sealed with a high temperature resistant fluorine rubber 0-ring.
d) The electrode introduction device is located in the lower part of the furnace body, a total of three groups. The material is copper. The inside and outside of the furnace are insulated by corundum tubes, and the structure is sealed. Flange connection with furnace body, 0-type sealing ring.
e) The furnace body is equipped with a charging and discharging device, the charging port is located below the furnace body, and the venting port is located above the furnace body.
f) There is a temperature control port on the furnace body, and a tungsten rhenium thermocouple is used for temperature measurement; and there is an electrode introduction device for 1100°C heat preservation.
Power
Temperature
uniformity
Vacuum
Rising Rate
Shanghai Geheng Vacuum Technology Co., Ltd. is a vacuum heat treatment furnace manufacturer with many years of experience in design, manufacturing and production. Mainly produce vacuum heat treatment furnace, vacuum sintering furnace, vacuum brazing furnace, New Energy And Environmental Protection Equipment and other vacuum equipments.Provide customized services, equipment work area can be based on customer output.
Learn more:
Resistance Heating Vacuum Hot Pressing Sintering Furnace
Induction Coil Heating Vacuum Hot Press Sintering Furnace
Copyright: SIMUWU Vacuum Furnace