Please send us your inquiry about the customization of other furnace types or related questions about vacuum furnace. We will reply you immediately. Thank you.
Downloads
All documents in the overview
News & Press
All news at a glance
Request
Send us a message
Email: contact@vacfurnace.com
Tel : +86-21-50878190
Wechat : 2210154395
Address: NO.1299, XinJinQiao Road, Pudong New Area, Shanghai, China.
Selection of Vacuum quenching Oil for Heat Treatment
The quenching oil is used as the cooling medium in the vacuum quenching process which is called vacuum quenching oil. Vacuum quenching means that metal parts are heated and quenched in a vacuum state [(10～70)×(10-2～10-3) Pa], which means that the entire heating and quenching process is at a ver...
Safety Precautions of Double-chamber Vacuum Oil Quenching and Gas Quenching Furnace
In order to ensure the safe operation of the vacuum oil quenching furnace and prevent the currence of accidents, the operation must be standardized, the existing hidden dangers should be controlled and prevented, and the three conditions of explosion should be prevented from occurring at the same...
Stainless steel high temperature atmosphere furnace
Product Introduction: Stainless steel high temperature atmosphere furnace with resistance wire/silicon carbon rod/silicon molybdenum rod as heating element, external heating mode, using temperature control system, silicon controlled. The furnace bile is high temperature resistant, pressure resist...
Stainless steel gas quenching furnace
Application: Mainly used for quenching of high speed steel, die steel and stainless steel; Solid solution treatment of stainless steel and titanium alloy; Vacuum heat treatment, high temperature brazing and vacuum sintering of magnetic materials and low temperature tempering with convection fans ...
Operation specification of hot cleaning furnace
1. Clean the oil stains or inflammable and explosive substances on the surface of the hanger or workpiece. 2. Pull the trolley out of the furnace and load the hanger or workpiece. Note: the loaded workpieces or hangers should not be piled up randomly, and sufficient hot air circulation between wo...
burn off oven manufacturer
burn off oven can efficiently and safely wash chemicals attached to coating nozzles and other metal parts. Use of polymer is higher than 300 degrees was isolated from the air can be cracking, above 400 degrees in a small amount of air can completely oxidation characteristics, first with polymer s...
Working principle and application scope of hot cleaning furnace
By thermal cleaning to remove surface coating and paint of the hanging work pieces,they are placed in the main decomposition chamber at ambient workpieces temperature from 250 ~ 420 ℃ to removal of organic matter on the workpiece. After the process, the surface of work piece is without any organi...
Stator Vacuum Pressure Paint Impregnating Process
Abstract: On the basis of composite insulation technology, the manufacturing technology of high voltage motor stator coil is improved, and a new manufacturing technology of motor stator coil, vacuum pressure impregnation painting technology, is put forward. This method has the advantages of less ...
Burn off Oven
Burn off Oven Introduction Burn off Oven Usage Burn off oven can be used to clean the coating on the coating and rework parts, also can be used for engine maintenance, according to its non-damaging metal thermal decomposition process, equipment is widely used in cars, home appliances, sports equi...
AZO target – Hot pressing process
Transparent Conductive Oxide (Transparent Conductive Oxide, TCO) is a visible light spectrum (380 nm lambda < 780 nm) high transmittance and low resistivity of thin film materials, because of its excellent photoelectric performance in energy saving, thermal, electromagnetic shielding window gl...