Three Chamber Vacuum Oil Quenching Furnace

Three Chamber Vacuum Oil Quenching Furnace is a kind of vacuum furnace, in the industry has been widely used in machinery, electronics, metallurgy and other industries, because is associated with the industry of these mechanical precision, so the vacuum oil quenching furnace operation specification is very important, if not careful may appear a lot of problems. how to operate is consistent with the specification!

1. Pay attention to the safe use of electricity. Although the vacuum furnace USES low pressure, there are still 380V, so it is necessary to pay attention to the safety of electricity.

2. In the production of the project, it is necessary to ensure that the air is not leaking and not leaking. The seal of the furnace and the cover of the vacuum furnace is made of rubber, so it needs to be cooled with a water barrier. If there is water leaking into the furnace, the temperature of the hearth will be high and it will cause an explosion.

3. The workpiece of the vacuum furnace must clean the oil on its surface, and also avoid the oil vapor from quenching oil tank into the furnace. After the oil vapor and air mixture can form explosive, once a fire or electricity will generate explosion, so vacuum furnace oven door should be closed after loading, after into the vacuum chamber of a stove or furnace, can electrify heats.
Vacuum oil quenching furnace has the advantages of good quality energy saving, safe and less polluting, so be sure to make full use of rise, want to make full use of rise, first must abide by the operation specification, safety operation, standardize the operation.