Supply of vacuum infiltration furnace

The vacuum infiltration zinc furnace is a surface technology that forms a uniform zinc-iron alloy layer surface by heating the zinc-iron atoms to diffuse into each other under a vacuum condition, thereby reducing zinc oxidation in the production process, thereby reducing the amount of zinc used and reducing the production cost, Compared with the amount of hot-dip galvanized reduced by about two-thirds, multi-alloy infiltration is infiltration of vacuum infiltration of another technology development, the widespread use of electricity, railways, construction, shipbuilding, plumbing, hardware, petrochemicals and so on.
Vacuum infiltration zinc furnace features:
1, vacuum infiltration zinc furnace under vacuum conditions, zinc oxide day oxidation, reduce the amount of less cost, strong adhesion, easy to fall off, anti-corrosion for a long time.
2, the infiltration layer controllable, uniform, smooth appearance, no hot metal galvanized tumor, raw thorns.
3, vacuum galvanized and other metal diffusion method, the treatment temperature is lower than the phase transition temperature of the matrix, does not change the metallographic structure and mechanical properties of the substrate, the test, the tensile strength of the workpiece, the yield has increased Avoid the strengthening steel, spring steel, alloy steel due to annealing caused by the strength of the problem of decreased elasticity.
4, safe and environmentally friendly operation, is the replacement of hot-dip galvanizing equipment.
5, combined with the experiment, the combination of strong, the Department of proliferation of metallurgical bonding, the test in line with the national standard of combining bending hammer does not fall off.
6, multi-alloy infiltration of long life, maintenance-free, can be described (10-15) years, or even longer.
7, without high temperature and pickling, no waste emissions, economic and environmental protection, the international community has been fully promoted and replaced by other multi-alloy infiltration.
Multivariate alloy infiltration is developed in the vacuum infiltration of a steel based on a new anti-corrosion technology. Zinc infiltration process is the development and innovation. Penetration agent in addition to zinc powder, seepage penetration agent, anti-binding agent, plus aluminum, nickel, rare earth alloys and other elements, under complex vacuum chemical reactions.
Zinc and other metal elements infiltrated the metal surface, and other matrix reaction of the formation of alloy layer, in addition to the advantages of vacuum infiltration of zinc, its thickness, hardness, wear resistance, corrosion resistance are greatly increased.