Spray metal sintering furnace

First, the use of metal spraying furnace
Spraying metal sintering furnace for spraying metal materials in hydrogen and nitrogen mixture of continuous sintering.

Second, spraying metal sintering furnace parameters
1, rated temperature: 1420oc (temperature measuring ring temperature)
2, common temperature: 1380oc (temperature measuring ring temperature)
3, rated power: 80kw
4, insulation power: ≤ 45kw
5, rated voltage: 380v
6, the number of phases: 3 phase
7, the number of heating zones: 4 districts
8, temperature control points: 4:00
9, temperature control accuracy: ≤ ± 1oc
10, section temperature difference (constant temperature): ≤ ± 4oc
11, hearth size (l × w × h): 4650 × 400 × 300mm
12, push plate size (l × w × h): 320 × 320 × 30mm
14, kiln dimensions (l × w × h): ~ 8650 × 3500 × 2500mm
15, mixing device: 10m3 / h (nitrogen, hydrogen automatically ratio)

Third, spray metallized sintering furnace atmosphere system
1, a total of 8 intake air equipment, flow control by the flow meter. Before and after the replacement of each room 1 (nitrogen); kiln, kiln seal cavity 1, 4 furnace (nitrogen, hydrogen mixture). Gas Explorer has an electrical contact pressure gauge, when the intake pressure can be an exception when the alarm. A total of two furnace furnace atmosphere sampling points, the user can monitor these two points at any time the atmosphere in the furnace chamber, the analyzer user-owned.
2, Air source user-owned, hydrogen and nitrogen mixing device can be adjusted according to user needs output of any proportion of the mixed atmosphere.
3, the pipeline is designed to have a gas humidifier, and with a temperature controller and dew point meter, automatic control of gas dew point temperature.