Mesh belt powder metallurgy sintering furnace

Mesh Belt Powder metallurgy sintering furnace adopts novel furnace body structure, optimized insulation design, automatic temperature and operation control, beautiful appearance of equipment, humanized operation, energy saving and environment protection, and can be perfectly adapted to the unique production process of the user.
First, the use and characteristics HHS-450-type sintering furnace for continuous operation heat treatment production line. Mainly used for pressing the powder metallurgy products, controlled atmosphere conditions for the ideal continuous sintering process. The production line with advanced control, significant energy saving, easy maintenance, quality assurance and other characteristics of the basic level of technology can be imported with the original quality synchronization.

Second, mesh belt powder metallurgy sintering furnace main technical parameters:
1, rated power 230KVA 380V / 50Hz
2, burn-in resistance heating
3, the net width of 450mm
4, with a network speed of 20 ~ 200mm / min (continuously adjustable)
5, the muff cross section (W) 470mm × (H) 100mm
6, the number of pre-burning zone: pre-burning zone 4 zone 4 zone sintering
7, the rated operating temperature of the sintering section 800 ℃ sintering 1150 ℃
8, production: output per hour / 250 ㎏
9, Sweden SUS310S tube heat-resistant stainless steel
10, temperature control accuracy ± 1 ℃
11, temperature uniformity ± 5 ℃
12, the protection of gas consumption ≤ 30Nm3 / h
13, furnace surface temperature rise ≤ 45 ℃
Third, mesh belt powder metallurgy sintering furnace working environment
1, water conditions
① water: tap water or other clean water (water does not contain sediment and other contamination, non-corrosive substances)
② water pressure: 0.15 ~ 0.3MPa ③ cooling water temperature: ≤ 25 ℃
2, mesh belt powder metallurgy sintering furnace installation conditions
① indoor installation, installation of the ground for the formation of a solid concrete floor.
② installation site without significant vibration or other impact.
③ Installation site should be well ventilated, no explosive media, medium enough to corrode the metal and the destruction of electrical insulation of gas and dust (including conductive dust).
4. The main components and parts of net belt type powder metallurgy sintering furnace Brief introduction The equipment is mainly composed of feeding section, pre-burning section, sintering section, slow cooling section, water cooling section, discharging section, net belt, net belt driving device, Protection atmosphere control device and electric control device and other parts (with structure diagram). The whole device adopts axle-type furnace, can better protect the gas loss, than the average furnace can save 1/3 gas consumption, but also to ensure product brightness.