Industrial furnace used high strength aluminum silicate fiber board

Industrial furnace used high strength aluminum silicate fiber board

Industrial furnace used aluminum silicate fiber board, if the tensile strength is low, the surface will easily appear crack and wrinkle.This leads to layer and peeling when cutting, the cutting surface is rough, can not be cut into small panel. When construct the furnace lining with large curvature or complicated shape, the board always need to be pre-formed in refractory material plant. It will increase the material cost, and under the condition of big error on furnace shell ,can not make preformed aluminum silicate fiberboard fit closely with the actual curve of the furnace.
CCEWOOL aluminum silicate fiber board produce by full automatic production process, 2h deeply drying, is a vacuum formed high strength fiber board. It has lower thermal conductivity and high strength, will not easily appear crack and wrinkle when slightly bend.The board can be cut and processed by cutters and carpenter’s saw. The surface is smooth without layering.CCEWOOL aluminum silicate fiber board can be cut into small pieces ,which can easily fill the furnace surface thereby forming a tight overall.It is applied to various industrial furnaces backing, hot surface with high flue gas velocity and also widely used in petrochemical industry, iron and steel industry, glass industry, ceramics and all kinds of kilns in aluminum industry。
Tags:Industrial furnace used high strength aluminum silicate fiber board