Ceramic industry sintering furnace

---

one. Ceramic industrial sintering furnace Features: Lifting ceramic sintering furnace is the most high-grade industrial ceramic sintering the best sintering furnace, heating element using “field” word distribution method, with the product heat evenly, easy loading and unloading products, good insulation performance, high control accuracy, Cooling speed, easy operation, the use of high temperature advantages.

two. Ceramic industry sintering furnace to adapt to the industry: alumina, zirconia ceramic products sintering. Precision ceramics, special ceramic sintering. Glass and ceramic products glazed hardened sintered. Glass products such as annealing.

Ceramic sintering furnace is a kind of high temperature, the ceramic green solid particles of mutual bonding, grain growth, voids (pores) and grain boundaries gradually reduced, through the material transfer, the total volume shrinkage, density increases, And finally a stove having a dense polycrystalline sintered body having a certain microstructure.

Third, the ceramic industry sintering furnace description:

1, sintered

Powder or compact at a temperature below the melting point of the main component, with the aim of combining the metallurgical bonding between the particles to increase their strength.

2, packing

A material in which the green compact is buried in order to separate and protect during the calcination or sintering process.

3, burned

And heat treatment of the compact at a temperature lower than the final sintering temperature.

4, pressure sintering

A sintering process is applied at the same time with a single axial pressure.

5, loose sintering

The powder is sintered directly without pressing.

6, liquid sintering

The powder or compact having at least two components is sintered in the form of a liquid phase.

7, burned

Sintering temperature is too high and / or sintering time is too long to cause the final deterioration of the product sintering.

8, less burned

Sintering temperature is too low and / or sintering time is too short so that the product does not achieve the desired performance of the sintering.