Car-type pottery sintering furnace

First, the trolley ceramic furnace sintering purposes
Trolley-type ceramic mold sintering furnace is designed according to the characteristics of shoe molds dedicated sintering furnace; heating method for the burner flame and electric heating.
Mainly used for forming mold steel sintering process. Also applies to metal parts in normal atmosphere for normalizing, annealing, quenching and other heat treatment processing and other uses of products preheating, heating, sintering.
Second, trolley ceramic furnace sintering furnace features
1 shell mainly by the steel, welded plates, compact structure, durable.
2, the side of the furnace lining, furnace door and roof with high aluminum fiber module, the middle interspersed stainless steel riveting fasteners fixed in the furnace shell. Solid and light, less heat, good insulation effect; trolley face with high aluminum load-bearing brick, refractory brick and insulation brick masonry, strong, load capacity, long service life.
3, the door frame from the steel, welded plates, the internal filling of high-aluminum fiber cotton; door Kai, closed for the electric lift, the use of automatic spring, connecting rod compression separation structure. The advantage is that when the door is ascended and descended, the door of the furnace door is automatically separated from the furnace body without friction; when the descent is closed, the seal is automatically compressed.
4, trolley frame made of steel, welded plates. Using reducer drive, sprocket, chain, gear drive to take the wheel to walk.
5, the sealing mechanism trolley and the furnace seal using mechanical automatic sealing device, the roller drive connecting rod automatically lift the seal groove to achieve, seal the tank filled with fine sand.
6, the furnace floor using Cr25Ni20Si2 material (35mm), laying on the trolley work surface. Load the work piece and prevent scale from dropping into the bottom heating element.
7, heating element material 0Cr27Al7MO2, processed into a corrugated and spiral, are located on both sides of the furnace, door, back wall and the bottom of the trolley surface, five heating to ensure uniform temperature.
8, the control system Shanghai Dragon PID intelligent instrument temperature control, SCR adjustment of power, Shanghai UOB recorder temperature curve and over-temperature alarm. (Can be configured according to user needs imported instruments and appliances)
Third, trolley ceramic furnace sintering furnace parameters
Rated voltage: 3 phase 380v.
Rated frequency: 50Hz.
Rated temperature control: 1150 ℃.
Rated power: 110KW.
Number of templates: 8
Temperature control: programming control.